Differences

This shows you the differences between two versions of the page.

--- documentation:robots:spot [2023/04/24 19:51] – [Spot Core Usage Guide] mings
+++ documentation:robots:spot [2023/06/22 12:26] (current) – [Controller after shutdown] marcusk
@@ Line 21: / Line 21: @@
 There is a small computer carried by Spot to run all your software/experiments. This takes Docker containers and runs it on a Linux platform. The correct networking setup is key to ensuring that whatever you run on your laptop continues to run well on the Spot Core. The following services are available at the corresponding addresses:
-  - 192.168.80.3:21900 is the Portainer interface
+  - [[192.168.80.3:21900|192.168.80.3:21900]] is the Portainer interface
-  - 192.168.80.3 is the Spot robot admin interface
+  - [[192.168.80.3|192.168.80.3]] is the Spot robot admin interface
-  - 192.168.80.3:21443 is the Spot CORE admin interface
+  - [[192.168.80.3:21443|192.168.80.3:21443]] is the Spot CORE admin interface
 ===== Manual Usage Guide =====
 The Spot robot can be controlled manually with the included tablet controller.
@@ Line 91: / Line 91: @@
 The rest of the controls rely on the touchscreen of the robot.
+==== Controller after shutdown ====
+Make sure the controller is powered off. Connecting it to power will automatically power it on and it **does not have autoshutdown** and will discharge if not manully powered off.
+**Make sure controller is always powered off when you are finished using Spot!**