Differences

This shows you the differences between two versions of the page.

--- documentation:robots:panda [2023-11-09 16:22] – [Todo] Julian Salt Ducaju
+++ documentation:robots:panda [2023-11-09 16:26] (current) – Julian Salt Ducaju
@@ Line 22: / Line 22: @@
 Based on https://www.franka-community.de/t/reset-admin-password-or-reset-to-factory-settings/184, there are two ways recommended by Franka Emika:
--**First way**
+**First way**
--1. Navigate to the login page of Desk.
+  * 1. Navigate to the login page of Desk.
--2. Open the debug window.
+  * 2. Open the debug window.
--3. Switch to the console tab.
+  * 3. Switch to the console tab.
--4. Enter <fetch("/admin/api/factory-reset",{method: ‘POST’})> without the <>.
+  * 4. Enter <fetch("/admin/api/factory-reset",{method: ‘POST’})>, without the <>.
--5. Pressing enter does a factory reset. Just wait for the reboot (robot will start blinking in yellow).
+  * 5. Pressing enter does a factory reset. Just wait for the reboot (robot will start blinking in yellow).
+**Second way**
+Manually boot the controller into the Rescue System, by performing the following steps:
+  * Shut down the controller and switch off the main switch as soon as the fans are switched off.
+  * Wait approx. 10 sec. Before restarting the control by switching on the main switch.
+  * Wait at least 20 sec and less than 40 sec.
+  * Switch off the control unit with the main switch.
+  * Wait 10 sec.
+  * Start the control again by switching on the main switch.